Eizo FlexScan L360 User Manual page 36

(5) "Phase" Adjustment
a) Select the "Phase" icon and push the Enter button to show the
b) If horizontal bars appear, these can be eliminated by adjusting the
c) After finishing the adjustment, push the Enter button to memorize
• "Phase" adjustments should be done after adjusting the "Clock".
• Horizontal bars may not completely disappear from the screen
depending on the PC.
(6) "Position" Adjustment
a) Select the "Position" icon and push the Enter button to enter the
b) Adjust the position of the upper left corner of the image using the
• If vertical bars of distortion appear after finishing the "Position"
adjustment, return to "Clock" menu and repeat the previously explained
adjustment procedure ("Clock" "Phase" "Position").
c) After finishing the adjustment, push the Enter button to memorize
36
2 USING THE SCREENMANAGER
"Phase" menu."
right and left buttons.
the settings and return to the "Screen" menu.
"Position" menu. Adjustment markers are displayed on each corner
of the screen.
Control buttons in order to align the Screen. If the entire image still
fails to fit inside the markers or is outside the markers, please proceed
to the next step, "Resolution".
the settings and return to the "Screen" menu.