Session Initiation Protocol (Sip) Settings; Data Call Settings; Vpn; Vpn Access Points - Nokia E62 User Manual

S e t t i n g s
Access point — Enter the access point name provided by your service provider to use the device as a packet data modem to
•
your computer.
These settings affect all access points for packet data connections.

Session initiation protocol (SIP) settings

Select Menu Tools Settings
> >
Session initiation protocols (SIP) are used to create, modify, and terminate certain types of communication sessions with one
or more participants (network service). SIP profiles include settings for these sessions. The SIP profile used by default for a
communication session is underlined.
Select Menu Tools Settings
> >
To create a SIP profile, select
Select a SIP profile to edit.
Select the SIP profile you want to use for communication sessions and
To delete a SIP profile, select it, and press the backspace key.
Select Menu Tools Settings
> >
Select from the following settings:
Profile name — Enter a name for the SIP profile.
•
Service profile — Select
•
Default access point — Select the access point to use for the Internet connection.
•
Public user name — Enter the user name received from your service provider.
•
Use compression — Select if compression is used.
•
Registration — Select the registration mode.
•
Use security — Select if security negotiation is used.
•
Proxy server — Enter the proxy server settings for this SIP profile.
•
Registrar server — Enter the registration server settings for this SIP profile.
•
The settings available for editing may vary.
Select Menu Tools Settings
> >
Proxy servers are intermediate servers between a browsing service and its users used by some service providers. These servers
may provide additional security and speed up access to the service.
Select from the following settings:
Proxy server address — Enter the host name or IP address of the proxy server in use.
•
Realm — Enter the proxy server realm.
•
User name and Password
•
Allow loose routing — Select if loose routing is allowed.
•
Transport type — Select
•
Port — Enter the port number of the proxy server.
•
Select Menu Tools Settings
> >
Select from the following settings:
Registrar serv. addr. — Enter the host name or IP address of the registrar server in use.
•
Realm — Enter the registrar server realm.
•
User name and Password
•
Transport type — Select
•
Port — Enter the port number of the registrar server.
•

Data call settings

Select Menu Tools Settings
> >
To set the time-out period after which data calls automatically end if no data has been transferred, select
User defined to enter the time yourself or

VPN

VPN access points

To manage VPN access points, select
Edit — Edit the selected access point. If the access point is in use or its settings are protected, you cannot edit it.
•
New access point — Create a new VPN access point.
•
Delete — Delete the selected access point.
•
Copyright © 2006 Nokia. All Rights Reserved.
Connection SIP settings.
> >
Connection SIP settings.
> >
Options Add new Use default profile
> >
Connection SIP settings
> >
IETF or Nokia 3GPP.
Connection SIP settings
> >
— Enter your user name and password for the proxy server.
UDP or TCP.
Connection SIP settings
> >
— Enter your user name and password for the registrar server.
UDP or TCP.
Connection Data
> >
Unlimited
VPN VPN access points
>
or Use an existing
Options
Options Add new
> >
Options Add new
> >
Options Add new
> >
call.
to keep the connection active until you select
Options and from the following settings:
>
82
profile.
Default profile.
>
or Edit.
or Edit Proxy server.
>
or Edit Registrar server.
>
Options
Online time. Select
> Disconnect.