Position View; Trip Distance View; Manage Waypoints; Navigator Settings - Nokia E62 User Manual

T o o l s

Position view

View positioning info such as the latitude and longitude coordinates and altitude of your current location. You can also see the
accuracy of this info.
Select from the following:
Save position — Save your current location as a waypoint or landmark.
•
Satellite status — View the signal strength of the satellites that provide the positioning info necessary for navigation.
•
Saved locations — View the locations you have temporarily saved in your device to help in navigation.
•

Trip distance view

The trip meter calculates the travelled distance and time and your average and maximum travelling speeds.
Select from the following:
Start — Activate the trip meter.
•
Stop — End using the trip meter. The values calculated by it remain on the display.
•
Resume — Continue using the trip meter.
•
Reset — Set the values calculated by the trip meter to zero and start recalculating them from the start.
•
Clear — Empty the trip meter values after stopping its use.
•
Save position — Save your current location as a waypoint or landmark.
•
Satellite status — View the signal strength of the satellites that provide the positioning info necessary for navigation.
•
Saved locations — View the locations you have temporarily saved in your device to help in navigation.
•

Manage waypoints

Select Position Options
>
Waypoints are locations you can temporarily save in your device to help in navigation.
To save a waypoint in Navigator, Position, or
To save a temporary waypoint as a more permanent landmark, select
To delete a waypoint, scroll to it, and press

Navigator settings

Select Options > Settings.
To change the measuring system in use, select
To enter the altitude calibration to correct the altitude received from the positioning satellites, select

Landmarks

Select Menu Tools > Landmarks.
>
Landmarks are coordinates to geographic locations that you can save to your device for later use in different location-based
services. You can create landmarks using a Bluetooth GPS enhancement or network (network service).
To create a landmark, select
longitude coordinates of your current location or
information may be a name, category, address, latitude, longitude, and altitude.
To view or edit a landmark, scroll to it, and press the joystick.
To delete a landmark, scroll to it, and press the backspace key.
With each landmark, select
Add to category — Organize the landmark to a group of similar landmarks. Scroll to the category, and press the joystick. To
•
view your landmark categories, scroll right or left.
Send — Send the landmark to compatible devices.
•
Edit categories — Add, edit, or delete the your landmark categories.
•
Landmark icon — Change the icon of the landmark. Scroll to the desired icon, and press the joystick.
•

Landmark categories

You can view landmark categories in two views: one lists categories that already contain landmarks, and the other lists all
categories.
To view the landmarks, select the category, and press the joystick.
To move a landmark, scroll left. Scroll to a landmark, and press
the joystick to remove the mark. Scroll to the category to add the landmark, and press the joystick. Select Accept.
Copyright © 2006 Nokia. All Rights Reserved.
Saved locations.
>
Trip dist.
Options
Measurement system
Options New landmark. Select
>
Enter manually
Options and select from the following options:
view, select Options
>
Options
> Clear.
Metric
>
Current position
to fill in the necessary location information. Location
Options Add to
>
30
Save position.
Save as landmark.
>
or Imperial.
to make a network request for the latitude and
category. Scroll to the old category, and press
Altitude calibration.