Printing specialty documents
Tips on using letterhead
Page orientation is important when printing on letterhead. Use the following table to determine which direction to
load the letterhead:
Source or process
•
Standard 250-sheet tray
•
Optional 250-sheet tray
•
Optional 550-sheet tray
Duplex (two-sided) printing from
trays
Manual feeder (simplex printing)
Note: Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable for
laser printers.
Print side and paper orientation
Printed letterhead design is placed facedown. The top edge of the sheet with the logo
is placed at the front of the tray.
Printed letterhead design is placed faceup. The top edge of the sheet with the logo is
placed at the rear of the tray.
Preprinted letterhead design is placed faceup. The top edge of the sheet with the logo
should enter the manual feeder first.
Printing
59