Lexmark 34S0109 - E 260dt B/W Laser Printer User Manual page 20

An optional drawer attaches under the printer. A drawer consists of two parts: a tray and a support unit. The printer
supports one optional drawer; you can install a 250- or 550-sheet drawer.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall
outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and
unplug any cables going into the printer.
1
Unpack the drawer, and remove any packing material.
2
Remove the tray from the support unit.
1 Support unit
2 Tray
3
Remove any packing material and tape from inside the tray.
4
Insert the tray into the support unit.
5
Place the drawer in the location chosen for the printer.
Additional printer setup
20