Loading Trays; Loading The Standard Tray And The Optional 250-Sheet Tray - Lexmark 26H0122 - T 430d B/W Laser Printer User Manual

Loading trays

Your printer has two standard sources, the 250-sheet tray (standard tray) and the multipurpose
feeder. For more information, see
media you use for the majority of your print jobs in the standard 250-sheet tray.
Proper print media loading helps prevent jams and helps make your printing trouble-free.
Before loading print media, know the recommended print side of the print media you are using. This
information is usually indicated on the print media package.
Do not remove trays while a job prints. Doing so may cause a jam.

Loading the standard tray and the optional 250-sheet tray

The following instructions work for loading the standard tray or the tray for the optional 250-sheet
drawer.
Your printer has one standard 250-sheet tray.
For the sizes and types of print media these trays support, see
To load the tray for the optional 500-sheet drawer, see
To load print media in a tray:
1
Remove the tray completely.
2
If you are loading print media that is over 90 g/m
[28 lb]), adjust the dial on the bottom of the tray. See
(24 lb) on page 25
Print media
Loading and using the multipurpose
for more information.

Loading trays

20
feeder. Load the print
Print media source
Loading the optional 500-sheet
2
(24 lb) (but no greater than 105 g/m
Loading print media over 90 g/m
specifications.
tray.
2
2