Lexmark 26H0122 - T 430d B/W Laser Printer User Manual page 99

Menu item Purpose
NPA Mode To specify whether the printer
performs the special processing
required for bidirectional
communication, following the
conventions defined in the
Network Printing Alliance (NPA)
Protocol.
Note: Changing this menu item
automatically resets the printer.
PCL To configure the printer so it
automatically switches to
SmartSwitch
PCL emulation when a print job
received through the network port
requires it, regardless of the
default printer language.
PS
To configure the printer so it
automatically switches to
SmartSwitch
PostScript emulation when a print
job received through the network
port requires it, regardless of the
default printer language.
Std Net To configure an internal print
server.
Setup
Understanding the operator panel
Using the printer menus
99
Values
Off Printer does not perform NPA
processing.
Auto* Printer examines the data to
determine the format and then
processes it appropriately.
On* Printer examines data on the
network interface and selects
PCL emulation if the data indicates
that is the required printer
language.
Off Printer does not examine the
incoming data. The printer uses
PostScript emulation to process
the job if PS SmartSwitch is On, or
uses the default printer language
specified in the Setup Menu if PS
SmartSwitch is Off.
On* Printer examines data on the
network interface connection and
selects PostScript emulation if the
data indicates that is the required
printer language.
Off Printer does not examine the
incoming data. The printer uses
PCL emulation to process the job if
PCL SmartSwitch is On, or uses
the default printer language
specified in the Setup Menu if PCL
SmartSwitch is Off.
Values for this menu item are supplied by the specific
print server. Select the menu item to see the available
values.
Note: Refer to the documentation on the drivers CD
for more information.