●
To set input signal selection [Input Signal]
The monitor recognizes the connector through which PC signals are input.
When either PC is turned off or enters the power-saving mode, the monitor
automatically displays signals of another PC.
Priority setting
Auto
When either PC is turned off or enters the power-
saving mode, the monitor automatically displays
signals of another PC.
The monitor detects only the PC's signals currently
Manual
displaying automatically. Select an active input signal
with
[Input signal setting]
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Input Signal> from the <Others> menu, and press
The <Input Signal> menu appears.
(3) Select "Auto" or "Manual" with
The setting is completed.
Chapter 3 Connecting Cables
0
Function
.
or
, and press
NOTE
• When "Auto" is selected for <Input
Signal>, the monitor's power-saving
function works only when the two
PCs are in the power-saving mode.
.
.
.