Eizo FlexScan EV2303W User Manual page 15

3
Perform the auto adjustment again with the analog screen
adjustment pattern displayed.
● To adjust flickering, screen position, and screen size
automatically [Screen]
(1) Display Pattern 1 in full screen on the monitor using the "Screen
Adjustment Utility" or the screen adjustment pattern files.
(2) Choose <Screen> from the <Auto Adjustment> menu, and press
.
The <Auto Adjustment> menu appears.
(3) Choose <Execute> with
Flickering, screen position, and screen size are corrected by the auto-
adjustment function.
If the screen is not displayed correctly even after adjusting in step
3 above, perform the adjustments according to the procedures on
the following pages. When the screen is displayed correctly, go to
step 5 "To adjust color gradation automatically [Range]".
4
Perform advanced adjustments for the following using the
<Screen> menu of the Adjustment menu.
Adjust the clock, phase and position, in this order.
● To eliminate vertical bars [Clock]
(1) Choose <Clock> from the <Screen> menu, and press
The <Clock> menu appears.
(2) Adjust the clock with
The adjustment is completed.
● To remove flickering or blurring [Phase]
Adjustable range: 0 to 63
(1) Choose <Phase> from the <Screen> menu, and press
The <Phase> menu appears.
(2) Adjust the phase with
The adjustment is completed.
.
or , and press
.
or , and press
.
or , and press
NOTE NOTE
• Press the control button slowly so as • Press the control button slowly so as
not to miss the adjustment point. not to miss the adjustment point.
• When blurring, flickering or bars • When blurring, flickering or bars
appear on the screen after adjustment, appear on the screen after adjustment,
proceed to [Phase] to remove proceed to [Phase] to remove
.
flickering or blurring. flickering or blurring.
Attention Attention
• Flickering or blurring may not be • Flickering or blurring may not be
eliminated depending on your PC or eliminated depending on your PC or
.
graphics board. graphics board.
NOTE NOTE
• When vertical bars appear on the • When vertical bars appear on the
screen after adjustment, go back to screen after adjustment, go back to
"To eliminate vertical bars [Clock]". "To eliminate vertical bars [Clock]".
(Clock → Phase → Position) (Clock → Phase → Position)
Chapter 2 Settings and Adjustments
1