Oki ML620 User Manual page 67

MENU SETTINGS TABLE
Group Item
CSF (Cut Cut Sheet Top of Form
Sheet
Feeder) Bin
1
(cont.)
LF Revise
Centering Position
Extension Detect Sprocket Hole
Right Margin (Continuous
paper)
Function
Specify an adjustment value for
the reference position for the
TOF position when feeding a cut
sheet (up to the mid-section of
characters in the first line).
Adjust the line feed in cut sheet
mode.
Used to limit printhead travel
when printing narrow columns.
Select Mode 1 for ML620. Select
Mode 1 or Mode 2 for the ML621.
For continuous paper set to be
fed via the individual Form paper
route: the default is to have the
printer detect sprocket holes; to
turn detection off, set to disable.
If the printer data exceeds the
width of the paper, printing is
truncated column-by-column.
Specify a margin from the right
edge of the paper.
Settings (defaults are set in bold italic)
1/12" (2.12 mm), 2/12" (4.23 mm),
3/12" (6.35 mm), 4/12" (8.47 mm),
5/12" (10.58 mm), 6/12" (12.70
mm), 7/12" (14.82 mm), 8/12"
(16.93 mm), 9/12" (19.05 mm),
10/12" (21.17 mm), 11/12" (23.28
mm), 12/12" (25.40 mm), 13/12"
(27.52 mm), User Top of Form
–14 ~ –1, 0, +1 ~ +14
Default, Mode1, Mode2
Enable, Disable
Right Margin Over, .0394" (1 mm),
.12" (3 mm), .2" (5.08 mm), .39"
(10 mm), .51" (13 mm), .59" (15
mm), .79" (20 mm), .98" (25 mm)
ML620/ML621 User's Guide