Print Quality; Draft: Utility-The Default; Hsd: High Speed Draft; Ssd: Super Speed Draft - Oki ML620 User Manual

Print Quality

Important!
Front panel settings for print quality and character
pitch are normally overridden by software commands.
Draft: Utility —the default
Medium quality, medium speed (380 cps)

Gothic typeface only


HSD: High Speed Draft

Lower quality, higher speed (507 cps)

Gothic typeface only


SSD: Super Speed Draft

Lowest quality, highest speed (570 cps)

Gothic typeface only


NLQ: Near Letter Quality

Highest quality, slowest speed (95 cps)

Courier or Gothic

Note: Available Print Quality settings depend on which
Character Pitch setting is selected.
There are three
PRINT QUALITY
The sequence of lights shows which print quality
setting is active:
   SSD
   HSD
   Draft
   Courier
   Gothic
   OCR-B
(
 = light off,  = light on)
The default
PRINT QUALITY
To change the
PRINT QUALITY
key. Each time the key is pressed the light sequence
above the
PRINT QUALITY
options have been cycled through.
indicator lights:
is "DRAFT."
press the
PRINT QUALITY
key changes until all the
ML620/ML621 User's Guide