Advertisement
Reinforcement stay
Leg (Large end)
Resonators (Accidental tone side)
v
A
Frame end
(Large end)
Leg (Large end)
P
Rail (Performer's side)
D
3-4
After attaching the resonators on the natural tone
side and accidental tone side, adjust the angle of
the resonator support so that it supports the natu-
ral tone side (marked with an "O") at the D18 reso-
nator and the accidental tone side (marked with a
"P") at the D#19 resonator.
O
Resonator Support
Resonators (Natural tone side)
v
Mount the outer rails in the same manner as
the inner rails.
The outer rail with the YAMAHA logo attached
should face the audience. The ends of the rail are
marked with a "D" and an "H".
The ends of the outer rail on the performer's side are
marked with an "A" and an "E". Mount the rails so
that the marks are matched ot the slots labeled with
the same character.
Assembly
E
H
Frame end
(Small end)
Leg (Small end)
13
Advertisement
