Xerox 4150xf - WorkCentre B/W Laser Manual page 5

dc07cc0418
Customer Support
•
The device must have the network scanning option enabled.
•
The device must be configured with the SNMP GET community string set to
"public" or the WIA driver will not detect the device properly.
Windows XP Professional Service Pack 2 has Windows Firewall turned on by default
or your site may have Windows Firewall enabled for security reasons. If Windows
Firewall is enabled, you must set up Exceptions for print and file sharing to ensure
that scanning with the WIA driver works properly.
Obtaining the Driver Installation Files
To ensure that the latest release of the driver is installed, it is recommended to
download the latest driver from the Xerox support web site.
1. Within your browser window type
2. Select [Support and Drivers], enter the product number in the field provided and
select [Search].
3. Select [Drivers & Downloads] for your specific product.
4. Select the WIA Scan Driver that is listed within the Drivers section.
5. Review the End-User License Agreement, and select either [Accept] or [Decline].
6. Clicking Accept will cause a File Download window to appear.
7. Select [Save] and download the file to a known location on your workstation.
Installing the WIA Driver
If the driver is not installed automatically upon download, follow the steps below.
1. Logged on to the workstation as an administrator, open the Windows Control
Panel.
2. Click [Scanners and Cameras]. Click [Add an imaging device].
3. The Scanners and Camera Installation Wizard opens. Click [Next].
4. Click [Have Disk] and browse to the location of the installation files.
5. Select the appropriate .inf file and click [Open, OK].
6. Select the WorkCentre Scanner from the model list. Click [Next].
7. Accept the default scanner name or enter a new name. Click [Next].
8. Click [Finish]. Files are copied to the PC.
9. The Hardware Update Wizard opens. Click [Next].
http://www.xerox.com
Page 5