dc07cc0418
Customer Support
Enable the SSL (Secure Socket Layer) protocol
1. In the Internet Services Properties menu, click [Connectivity, Protocols, HTTP].
2. In the HTTP Security Mode menu click [Require SSL].
3. Click [Apply] and close the acknowledgement window that opens.
4. Close your web browser and then access the Internet Services screen again. The
Security warning will display. Self-signed certificates usually cause browsers to
display messages which question the trust of the certificate. Click [OK] to continue.
Verify Scan Template Management Enabled
1. Click [Services, Scan Template Management].
2. Verify that the Scan Template Management - Enabled box is checked, if it hasn't
been enabled automatically, check the box now.
3. If prompted, enter the current tools administrator user name and password. The
default is [admin] and [1111].
Xerox WIA Drivers
Installation Requirements
The following are required for installing WIA drivers:
•
The workstation must be running the Microsoft Windows XP Professional
Operating System.
•
You must possess Administrator rights on the workstation to install the driver.
•
Domain and local user accounts are supported.
•
The workstation must have TCP/IP and HTTP enabled.
•
Simple File Sharing must be disabled on the workstation to allow for proper device
authentication.
Page 4