For Mac Os; 10.1/10.2.1 Or Greater - Brother 8840DN - B/W Laser - All-in-One Quick Setup Manual

Step 2
For USB Interface Cable Users

For Mac OS

Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 4 - 11.
1
Switch off and unplug the MFC from the AC
outlet and disconnect it from your Macintosh
if you already connected an interface cable.
2
Turn on your Macintosh
3
Insert the supplied CD-ROM for Macintosh
into your CD-ROM drive.
4
Double-click the Start Here OSX icon to
install the printer driver, Scanner driver,
Brother PC-FAX Send and Remote Setup
program. If the language screen appears,
select your language. (Scanning is not
supported in Mac OS
5
Click Install next to the MFL-Pro Suite.
6
Select USB Interface, and then click
Install.
44
Installing the Driver & Software
®
X 10.1/10.2.1 or greater
®
.
®
10.1.)
7
Connect the USB interface cable to your
®
Macintosh
Do not connect the MFC to a USB
port on a keyboard or a non powered
USB hub.
8
®
Turn on the MFC by plugging in the power
cord. Turn the power switch on.
9
Select Applications from the Go menu.
0
Open the Utilities folder.
, and then connect it to the MFC.