2000 Professional Users Only - Brother 8840DN - B/W Laser - All-in-One Quick Setup Manual

For Windows
Make sure that you followed the instructions in
G
When this screen appears, connect the
parallel interface cable to your PC, and then
connect it to the MFC.
Turn on the MFC by plugging in the power
cord. Turn the power switch on.
.
H
Click the Next.
I
The README.WRI file will be displayed.
Please read this file for troubleshooting information
and then close the file to continue installation.
®

2000 Professional Users Only

1 F
to on pages 25 - 27.
J
Check the Run On-Line Registration and
then click Next.
K
Click Finish to restart your computer.
L
After the computer restarts, the installation
of the Brother drivers will automatically start.
Follow the instructions on the screen.
M
If the Digital Signature Not Found dialog
boxes appear, click Yes to install the driver.
N
Click Yes to have the Control Center loaded
each time Windows
Center will appear as an icon in the task tray.
If you click No the Scan keys on the MFC will
be disabled.
■ If you checked the box in step
screen for On-Line Registration will
appear. Please complete your registration
before proceeding to step
■ Even if you select No, you will be able to
launch the Brother Control Center later to
use the Scan to key by double clicking the
Smart UI icon on the desktop. This loads
the Brother Control Center to the task tray.
See AutoLoad the Brother Control Center,
Chapter 15 in the Dcumentation (User's
Guide) located on the CD-ROM.
®
is started. The Control
J
, the
N
.
Continued...
29