Brother 8840DN - B/W Laser - All-in-One Quick Setup Manual page 41

Step 2
For Network Interface Cable Users
(For Windows
F
Select Network Interface, and then click Next.
G
Select Standard, and then click Next.
The application files will be copied to your
computer.
If you want to install the PS driver, select Custom
and then follow the on-screen instructions. When
the Select Components screen appears, check
PS Printer Driver, and then continue following
the on-screen instructions.
H
Select Search the network for devices and
choose from a list of discovered devices
(Recommended), and then click Next.
If you see the following screen, click OK.
I
If the MFC is un-configured for your network:
Select the APIPA or un-configured device
from the list and then click Next. → Go to
40
Installing the Driver & Software
®
98/98SE/Me/NT/2000 Professional/XP)
If the MFC is configured for your network:
Select the MFC from the list and then click
Next. → Go to
J
Click Configure IP Address.
K
Enter the proper IP Address information for
your network, and then click OK.
(e.g. Enter 192.168.0.103 for IP Address)
L
Click Next.
See the For Administrator section of this guide or
the NC-9100h User's Guide located on the CD-
ROM for more network configuration information.
J
®
Windows 98/98SE/Me/2000/XP Users
➝ Go to
®
Windows NT
➝ Go to
M
N
Users
Q