For Usb Interface Cable Users; To 9.2 - Brother 8840DN - B/W Laser - All-in-One Quick Setup Manual

Step 2

For USB Interface Cable Users

For Mac OS
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 4 - 11.
1
Switch off and unplug the MFC from the AC
outlet and disconnect it from your Macintosh
if you already connected an interface cable.
2
Turn on your Macintosh
3
Insert the supplied CD-ROM for Macintosh
into your CD-ROM drive.
4
Double-click the Start Here icon to install
the printer, scanner and PC-FAX Send
drivers. If the language screen appears,
select your language.
5
Click Install next to the MFL-Pro Suite for
your country.
6
Select USB Interface, and then click Install.
7
After the installation is completed, restart
your Macintosh
42
Installing the Driver & Software
®

8.6 to 9.2

®
.
®
.
8
Connect the USB interface cable to your
®
Macintosh
Do not connect the MFC to a USB
port on a keyboard or a non powered
USB hub.
9
Turn on the MFC by plugging in the power
®
cord. Turn the power switch on.
0
From the Apple
, and then connect it to the MFC.
®
menu, open the Chooser.