Attaching The Lens Cover - Eiki LC-XE10 Owner's Instruction Manual

Appendix

Attaching the Lens Cover

When moving this projector or when it is not used for an extended
period, replace the lens cover.
1 Thread the string through the hole on the lens cover
and then tie a knot in the string to secure it in place.
Lens Cover
56
Hole
2 Thread the other end of the string through the hole
at the bottom of the projector. Then pass the lens
cover through the resulting loop of the string. Tie a
knot in the string to secure it in place.
Hole