Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen
Menu. Refer to the following pages regarding each
adjustment and setting procedures.
1
Press the MENU button to display the On-Screen
Menu.
2
Press the Point
adjust and press the Point
item to adjust.
3
Press the SELECT button to show the item
data. To adjust the data, press the Point
Refer to the following pages for each adjustment.
To close the On-Screen Menu, press the MENU
button again .
✔
Note:
The selected item is not active until the SELECT button is pressed.
20
buttons to select a Menu icon to
7 8
ed
buttons to select an
7 8
Top Control
POWER WARNING LAMP REPLA
SELECT button
buttons.
Remote Control
SELECT button
On-Screen Menu
Pointer (red framed )
Press the Point ed buttons
to move the pointer.
Item
SELECT
button
Quit
Exit this menu.
MENU button
POINT button
(outer ring)
MENU button
POINT buttons
Menu icon
Pointer
Menu bar
(red framed )
Item data
Press the Point 7 8
buttons to adjust the
value.