Example: Setting An S-Register - SimpleTech STI-FAX/28.8 User Manual

Example: Setting an S-Register

The S95 register is often written to in order to increase the
information returned by the modem when establishing
remote connections. For instance, to enable the CONNECT,
CARRIER, PROTOCOL, and COMPRESSION messages, you
would compute the S95 register value as follows:
0 Enable standard CONNECT message
4 Enable CARRIER message
8 Enable PROTOCOL message
32 Enable COMPRESSION message
44 Sum of these options
To set the register, you would type ATS95=44 <Enter>.
54