Table of Contents
Advertisement
2. Describing the Kit
Use the descriptions and illustrations in this chapter to become
familiar with your kit.
The Hardware
Refer to the figures and the descriptions below and on the next
page to become familiar with the hardware:
• The 28.8 Communicator (see Figure 2-1). The Type II PC Card
contains a connector for a PC Card socket, and a connector
for the Line Access Cable. The card is encased in metal,
allowing for safe handling. With Card and Socket Services
provided with your computer, the card features Plug n' Play
capability, i.e., the ability to insert or remove the card with
the computer power turned on. The card is keyed and will
install only in the proper orientation.
Connector for PC Card
Socket on Top Edge
Figure 2-1. The 28.8 Communicator
Identification of Card
(28.8 Communicator)
0153
Connector for Line Access Cable
on Bottom Edge
5
Advertisement
Table of Contents
