SimpleTech STI-FAX/28.8 User Manual page 34

Dn Dial Command. This command directs the modem to
go off-hook, wait for a dialtone, and dial the number
indicated in the dial string, n. The dial string may
contain the characters 0-9 for pulse-mode dialing or 0-9,
A-D, *, and # for touch-tone dialing. Spaces, hyphens,
and parentheses can be included in the command to
improve readability. For example, D (123) 456-7890 and
D1234567890 are equivalent.
In addition, the dial string may contain these dial com-
mand modifiers:
L Redial the last valid number entered.
P Pulse-mode dialing. (See S14.)
T Touch-tone dialing. (See S14.)
S=n Dial 1 of 4 stored telephone number, where n is 0, 1,
2, or 3. (See &Zn)
W Wait for a second dialtone. (See S7.)
, Pause before dialing the digits that follow. (See S8.)
@ Wait for quiet answer. Wait for one or more rings
followed by at least five seconds of silence before
continuing with execution of the dial string. This is
useful for transferring calls on some PBX systems.
; Return the modem to command state. When placed
at the end of the dial string, this puts the modem
into command mode. While in command mode, the
modem will not attempt to connect with the remote
modem.
22