Installing The Card; Checking For Card And Socket Services - SimpleTech STI-FAX/28.8 User Manual

3. Installing the Card

This chapter describes checking for Card and Socket Services,
attaching the card, and installing the communication software.

Checking for Card and Socket Services

You must have Card and Socket Services Release 2.1 provided
with your computer installed before using the modem.
Card and Socket Services Release 2.1 are device drivers that handle
all of the detecting, configuring, and enabling of any compatible
PC Card inserted into the system. These device drivers are not
specific to the Simple Technology 28.8 Communicator and will
support other PC Cards as well.
If you know that you already have Card and Socket Services
Release 2.1 installed, proceed to Attaching the Card.
If you do not know if you already have Card and Socket Services
installed, perform the following:
1. While booting your computer, press <F8>. With DOS 6
or higher, this will load the drivers in CONFIG.SYS one
line at a time.
2. When prompted, press "Y" to load each driver and look
for messages indicating that Socket Services Release 2.1
and Card Services Release 2.1 are loading.
NOTE: If Card and Socket Services Release 2.1 did not
load, fill out and mail the enclose coupon for a
free copy. Card and Socket Services Release 2.1
must be installed before proceeding.
If there are existing Card and Socket Services, proceed to
Attaching the Card.
9