Rear Terminal
①
①
SERVICE PORT
This jack is used to service the projector.
②
COMPUTER IN /S-VIDEO IN
/COMPONENT IN
Connect output signal from a computer,
RGB scart 1-pin video output, S-VIDEO
output, or component video output to this
terminal. (p.15-17)
③
MONITOR OUT
This terminal can be used to output the
incoming signal from COMPUTER IN/
S-VIDEO IN/COMPONENT IN terminal to
the other monitor. (p.15, 17)
④
AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this
jack. (p.15 - 17)
This terminal outputs sound from AUDIO IN
⑤
⑦
terminal (
or
).
⑤
COMPONENT/ COMPUTER AUDIO IN
Connect the audio output (stereo) from a
computer or video equipment connected to
②
to this jack. (p.15, 17)
②
③
⑥
⑦
Part Names and Functions
④
⑤
⑥
⑦
VIDEO IN
Connect the composite video output from
video equipment to VIDEO jack. (p.16)
AUDIO IN
Connect the audio output from video
equipment connected to
jack. (When the audio output is monaural,
connect it to L (MONO) jack.) (p.16)
②
⑥
or
to this
9