Top Control - Eiki LC-XB21A Owner's Manual

Part Names and Functions

Top Control

①
MENU button
Open or close the On-Screen Menu. (p.0)
②
▲▼
KEySTONE
Correct the keystone distortion. (p., 41)
③
INPUT button
Select input source. (p.5, 34, 35)
④
POWER ON/STAND-By button
Turn the projector on or off. (p.18, 19)
⑤
POWER indicator
Emit a red light until the projector gets
ready to be turned on. It turns red when
the projector is in the stand-by mode. It
remains green while the projector is under
operation. (p.18, 19, 60)
⑥
WARNING indicator
Emit a red light when the projector detects
an abnormal condition. This also blinks
red when the internal temperature of the
projector exceeds the operating range.
(p.51, 60)
10
⑧
⑨
buttons 
⑦
⑥
⑤
④
③
②
①
⑦
LAMP REPLACE indicator
Turn yellow when the life of the projection
lamp draws to an end. (p.54, 60)
⑧
VOLUME +/- buttons 
Adjust the volume level. (p.3）
⑨
SELECT button
– Execute the selected item. (p.0)
– Expand or compress the image in Digital
zoom mode. (p.33)
 POINT (▲▼◄►) buttons
② ⑧
and can be used as the point
buttons.
– Select an item or adjust the value in the
On-Screen Menu. (p.0)
– Pan the image in Digital zoom + mode.
(p.33)
(▲▼◄►)