Sceptre X42BV-FullHD User Manual page 73

DIGITAL AUDIO OUT
formats, PCM, and Bit Stream for digital home theater receivers.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
↵
2. Press
3. Press ▼ repeatedly to select DIGITAL AUDIO OUT.
↵
4. Press
5. Use ◄ or ► to select between the two options PCM and BITSTREAM.
Please Note :
•
•
•
•
– This function enables the TV to output sound in 2 digital
or ► to move to the functions and highlight SOUND MODE.
or ► to select the function.
PCM & BIT STREAM are two formats of digital sound. If you
have a digital home theater system, you should use BIT
STREAM for your digital audio out.
You must have a home theater system with SPDIF (optical)
input in order for this function to work.
Not all TV programming will give you digital surround sound.
The sound signal is based on the TV broadcasting station's
support. Please check with your local broadcasting stations for
more information.
This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
www.SCEPTRE.com
SCEPTRE X42 HDTV User Manual
- 73 -