Connecting A Pc; If You Want The Best Connection With Dvi (Digital) - Sceptre X42BV-FullHD User Manual

Connecting a PC

If You Want the Best Connection with DVI (digital)...

1. Make sure the power of X42 LCD HDTV and your PC is turned off.
2. Obtain a HDMI to DVI conversion cable; connect to the DVI side of
the conversion cable to the DVI output of your PC and the HDMI side
of the conversion cable to the HDMI port off the back of your X42
LCD HDTV.
3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and
the other end to the VGA Stereo Input port.
4. Turn on the power of the X42 LCD HDTV and your PC.
5. Use the remote control's source button or the source button on the
right side of the TV to switch to HDMI.
Please Note :
•
For the best picture, please set your PC resolution to 1920x1080 at 60 Hz.
Please refer to the PC or graphic card's manual for further instructions on
how to set your resolution and refresh rate.
•
Please refer to your PC manual for video output requirements of the video
card.
•
This TV will turn off automatically if there's no signal present for more than
15 minutes.
•
If HDMI 1 is already occupied, please use HDMI 2 as your connection port
and switch source to HDMI 2.
www.SCEPTRE.com
SCEPTRE X42 HDTV User Manual
- 39 -