For Your Wii - Sceptre X42BV-FullHD User Manual

For Your wii™ ...
1. Make sure the power of X42 LCD HDTV and your Wii player is turned off.
2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to
both your Wii and AV 1's Yellow Video connector port off the back of
your X42 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to both
your Wii and AV 1's white connector port off the back of your X42 LCD
HDTV.
4. Connect the red color connector to both your Wii and AV 1's red
connector port off the back of your X42 LCD HDTV.
5. Turn on the X42 LCD HDTV and your Wii.
6. Use the remote control's source button or the source button on the right
side of the TV to switch to AV 1 (CVBS).
Please Note :
•
•
•
•
If AV 1 is already occupied, please use AV 2 as your connection port
and switch source to AV 2 (CVBS).
AV 2 is located on the left side of the TV, while facing the front of the TV.
Please reference the
configured to output correctly to the TV.
This TV will turn off automatically if there's no signal present for more
than 15 minutes.
www.SCEPTRE.com
Wii
's manual as well, to make sure the
- 43 -
SCEPTRE X42 HDTV User Manual
Wii
is