If You Want The Fair Connection With S-Video - Sceptre X42BV-FullHD User Manual

If You Want the Fair Connection with S-Video...

1. Make sure the power of X42 LCD HDTV and your set-top box is
turned off.
2. Obtain an S-Video Cable. Connect the S-Video connector to both
your set-top box and AV 1's S-Video connector port off the back of
your X42 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to
both your set-top box and AV 1's white connector port off the back of
your X42 LCD HDTV.
4. Connect the red color connector to both your set-top box and AV 1's
red connector port off the back of your X42 LCD HDTV.
5. Turn on the X42 LCD HDTV and your set-top box.
6. Use the remote control's source button or the source button on the
right side of the TV to switch to AV 1 (S-Video).
Please Note :
•
•
•
•
•
If AV 1 is already occupied, please use AV 2 as your connection port and switch
source to AV 2 (S-Video).
Please reference the set-top box's manual as well, to make sure the set-top box
is configured to output correctly to the TV.
AV 2 is located on the left side of the TV, while facing the front of the TV.
Sceptre's X42 LCD HDTV supports SONY's universal remote code. Please
look up SONY's codes in your universal remote's hand book.
This TV will turn off automatically if there's no signal present for more than 15
minutes.
www.SCEPTRE.com
SCEPTRE X42 HDTV User Manual
- 36 -