Advertisement
Quick Links
QUICK START GUIDE
To start watching the TV right away you must complete the
following steps:
1. Verify you have received everything
2. Install the batteries to the remote control
3. Connect power and a cable or antenna to the TV
4. Turn on your TV and scan for channels
5. [OPTIONAL] TV Mounting Information
1. Package Contents
SCEPTRE X42 TV Display x 1
User Manual x 1
Power Cord x 1
Warranty / Registration Card x 1
X42 Remote Control (AAA Batteries included) x 1
Advertisement
Related Manuals for Sceptre X420BV-F120
Summary of Contents for Sceptre X420BV-F120
-
Page 1: Quick Start Guide
QUICK START GUIDE To start watching the TV right away you must complete the following steps: 1. Verify you have received everything 2. Install the batteries to the remote control 3. Connect power and a cable or antenna to the TV 4. -
Page 2: Installing Batteries To The Remote
2. Installing Batteries to the Remote Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards, re-attach the battery cover. Please note: •... -
Page 3: Connecting Your Cables
3. Connecting Your Cables The following picture offers a suggestion for connecting most of your audio video equipment. -
Page 4: Ready To Watch Some Tv
If You’ve Connected Antenna or Cable to the TV… If an antenna or cable (without a cable box) is connected to your TV’s tuner, you will need to go through an INITIAL SETUP process in order to watch the TV. When you turn on the TV for the first time, the INITIAL SETUP screen will come up. - Page 5 ▲▼ Use the buttons to select your tuner type and press ▲▼ Use the buttons to select Scan and press Once the scanning finishes, press Please Note : • Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting stations for more information.
-
Page 6: Removing The Base For Wall Mounting
2. Take a look at the neck that’s connecting the base to the TV. There should be 4 screws on the neck and 2 screws on the side. Remove the 6 screws and the base will slide off. - Page 7 3. Once you have taken off the base, please save it along with the 6 screws in a safe place so that they will not be lost when you want to re-attach the base. Mounting Specification: 400mm x 200mm using screw size M6. Length of screw should not exceed 12mm.