Rear View Connections - Sceptre X42BV-FullHD User Manual

SCEPTRE X42 HDTV User Manual

Rear View Connections

The following descriptions are for connections from left to right.
1. ATSC/NTSC – This connection is for digital or analog cable without the cable box or over-the-
airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital channels. This
connection uses coaxial RF cable. For over-the airwave digital stations please check
http://www.antennaweb.org. Use the SOURCE button to select TV on your MAIN SOURCE to view
this connection.
2. HDMI 1 – Connects to devices that use HDMI cable, such as Blu-ray or HD DVD player or HD
cable / satellite set-top box. This connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video device for video or PC for monitor
display usage. Use the SOURCE button to select HDMI1 on your MAIN SOURCE to view this
connection. Please note : when using HDMI, your sound signal must be PCM for the TV to decode
digital audio. When using this source for PC display, you must connect the audio cable to VGA
Stereo Input for audio.
3. HDMI 2 – Connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD
cable / satellite set-top box. This connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video device for video or PC for monitor
display usage. Use the SOURCE button to select HDMI2 on your MAIN SOURCE to view this
connection. Please note : when using HDMI, your sound signal must be PCM for the TV to decode
digital audio. When using this source for PC display, you must connect the audio cable to VGA Stereo
Input for audio.
4. VGA – This connection port connects to a PC for video using VGA cable. Be sure to connect your
audio cable to the VGA Stereo input if you want sound out of VGA video source. Use the SOURCE
button to select VGA on your MAIN SOURCE to view this connection.
5. VGA STEREO INPUT – This connection port is for people who want to provide audio to the TV
when using a PC or a DVI video device. Use a 3.5mm mini-jack audio cable (headphone jack) to
provide audio for a HDCP enabled DVI video device or PCs with VGA or DVI connection.
6. SERVICE – This port is for factory service by Sceptre's technicians only.
- 15 -
www.SCEPTRE.com