Connecting Your Dvd Player To The Tv; If You Want The Best Connection With Hdmi - Sceptre X42BV-FullHD User Manual

Connecting Your DVD Player to
the TV

If You Want the Best Connection with HDMI...

1. Make sure the power of X42 LCD HDTV and your DVD player is turned
off.
2. Connect a HDMI cable to the HDMI port of your DVD player and the
other end to the HDMI port off the back of your X42 LCD HDTV.
3. Turn on the X42 LCD HDTV and your DVD player.
4. Use the remote control's source button or the source button on the right
side of the TV to switch to HDMI 1.
Please Note :
•
•
•
•
Please reference the DVD player's manual as well, to make sure the
DVD player is configured to output correctly to the TV.
This TV does not decode Bitstream digital audio, therefore you'll need to
make sure your DVD is setup for PCM digital audio through HDMI.
If HDMI 1 is already occupied, please use HDMI 2 as your connection
port and switch source to HDMI 2.
This TV will turn off automatically if there's no signal present for more
than 15 minutes.
www.SCEPTRE.com
SCEPTRE X42 HDTV User Manual
- 30 -