Memory C-Card - Raytheon RayChart 620 Operation Manual

Chapter 6: Customizing the RayChart 620
To initialize the position fixer:
1. Press the INITIALIZE soft key. The current date, time and position
2. Use the trackpad to edit the entries to the required values, and
3. Alternatively, press the RESET soft key to reset the position fixer.
4. Press CLEAR or ENTER to return to the Fix Status screen, and

Memory C-Card

The MEMORY C-CARD option allows you to save or load data to or
from a Memory C-Card. Data is saved or loaded in files, by type: a file
can be used to store all waypoints, all marks, all tracks or an individual
route.
To save the data from the RayChart 620's memory to a C-Card:
1. Insert a Memory C-Card into one of the chart slots, in the same way
2. Press MENU to display the menus.
3. Use the soft key or trackpad to highlight the MEMORY C-CARD
settings are shown.
press INITIALIZE to send them to the position fixer.
CHART to return to the chart.
as for a chart card (see Chapter 2).
option on the SETUP menu, and press ENTER.
The list shows the names of the files, by type, stored on the current
C-Card.
69
D3840-1