Route List Operations - Raytheon RayChart 620 Operation Manual

52

Route List Operations

When the Route List is displayed, you can use the soft keys to display,
delete, or follow a selected route, and display the details of the
waypoints that make up the route:
ROUTE DETAILS
DISPLAY
DELETE
SELECT
or FOLLOW
or OFF
Displays the details of all the waypoints in the
selected route, in the same format as the
Waypoint List (see below), and allows you to
follow the route or access the Route Edit screen
Displays the selected route (see SELECT below)
on the chart at an appropriate scale. After 7
seconds, the display returns to the Route List.
Deletes the highlighted route. Press ENTER to
confirm the deletion. Note that this only deletes
the route from the route list – it does not delete the
component waypoints.
Selects the route so that it can be displayed or
activated. When a route is selected, the SELECT
soft key is replaced by either the FOLLOW soft
key or, if the route is already active, the OFF soft
key.
This soft key is displayed instead of SELECT if
the highlighted route has been selected and is not
already active. It activates the selected route,
tracking towards the first waypoint. This has the
same effect as the FOLLOW option from the
ROUTE default soft key menu.
Note that you can also reverse, select and
activate a route from the Route Details screen
(see below).
This soft key is displayed instead of SELECT or
FOLLOW if the highlighted route has been
selected and is active. It turns off the selected
route.
RayChart 620