Raytheon 112LP Installation Manual

Gps transducer
Hide thumbs Also See for 112LP:

Advertisement

Distributed by
Any reference to Raytheon or
RTN in this manual should be
interpreted as Raymarine.
The names Raytheon and RTN
are owned by the
Raytheon Company.

Advertisement

Table of Contents
loading

Summary of Contents for Raytheon 112LP

  • Page 1 Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company.
  • Page 2 Raystar 112LP GPS Transducer Installation Guide Covers: E32001 SeaTalk Version E32002 NMEA Version...
  • Page 3: Important Notice

    Package Contents Checking your Raystar 112LP Package The Raystar 112LP package contains the following standard items: 1. Low profile GPS receiver 2. Flush mount gasket 3. Mounting studs & Thumb nuts (x2) 4.
  • Page 4: Summary Of Features

    Care should be taken when disposing of this equipment as a Lithium battery is fitted internally. Local regulations may apply and must be adhered to. Raystar 112LP GPS Transducer Installation 12 Parallel channels 1575.42 MHz +/- 1 MHz (C/A code), L1...
  • Page 5 Raystar 112LP GPS Transducer Installation This page left intentionally blank...
  • Page 6 Raytheon Raystar 112LP GPS Receiver This booklet covers two models of the Raystar 112LP SeaTalk Version NMEA Version Before commencing installation ensure you have the correct unit for your application. Raytheon Marine cannot be responsible for incorrect operation due to incorrect unit specification. Always state which model you have when making any communication with Raytheon or a registered service agent.
  • Page 7: Surface Mounting

    Raystar 112LP GPS Transducer Installation Surface Mounting 1. Select a suitable area which allows access to the underside of the mounting surface for fixing and, using the template supplied in this document, carefully drill the two 6mm (0.25in) fixing holes marked.
  • Page 8 1” 14TPI thread until secure. or through the cable exit hole alongside the centre hole (B) or insert the cable into the side exit channel (C). the pole base using the two screws provided. Raystar 112LP GPS Transducer Installation D4191-1...
  • Page 9: Seatalk Version

    Connections NMEA Version Connection is made via a 10m (33ft) cable terminated with a moulded 6 pin connector. SeaTalk Version Connection is made via the 10m (33ft) cable with bare ends suitable for connection to an existing SeaTalk bus. NMEA Sentences Output GPGGA, GPGSA, GPGSV, GPGLL, GPRMC, GPVTG, GPDTM, PRAYA.
  • Page 10: Mounting Template

    Raytheon Raystar 112LP GPS Receiver Mounting Template 6mm (0.25") dia. for cable only Note: Access to the underside of the mounting surface must be available to allow for secure fixing. Raystar 112LP GPS Transducer Installation 36mm (1.4in) 18mm (0.7in) Cable Exit Channel 19mm (0.75") dia.
  • Page 11 Raystar 112LP GPS Transducer Installation This page left intentionally blank...
  • Page 12: Emc Installation & Service Guidelines

    There are no user serviceable parts in any Raytheon product. • Always report any EMC related problem to your nearest Raytheon dealer. We will use any such information to improve our quality standards. Raystar 112LP GPS Transducer Installation...
  • Page 13 Document Number: 81144-1 Raytheon Marine Company 676 Island Pond Road Manchester, NH 03109-5420 USA TEL (603) 647-7530 FAX (603) 634-4756 http://www.raymarine.com Raytheon Marine Europe Ltd. Anchorage Park, Portsmouth Hampshire, PO3 5TD England TEL +44 (0) 1705 693611 FAX +44 (0) 1705 694642...

This manual is also suitable for:

Raystar 112lp

Table of Contents