Setting Up Windows - Raytheon RayChart 620 Operation Manual

74

Setting Up Windows

The RayChart 620 includes 6 default sets of data that can be displayed
using the DISPLAY key options, as described in Chapter 4. These
options allow you to select the data set to be displayed in either one or
two windows, with a choice of window positions.
A powerful feature of the RayChart 620 is the ability to define your own
windows so that, when you request a windowed display, precisely the
data you require is displayed alongside the chart. You can define up to
4 customized windows, in addition to the 6 default windows.
To set up a customized window:
1. Press MENU to display the main menus.
2. Use the trackpad or the SCREEN soft key to highlight the
3. If the custom window you wish to set up or change is not already
WINDOWS option from the SCREEN menu, and press ENTER.
The Customize On Screen Data Windows screen is displayed,
showing the last-used window selection. An example screen is
shown below.
displayed, use the REVIEW soft key to display the required window.
Now you are ready to start specifying the data that will be displayed.
The NAVDATA and SEATALK menus list all the data that is
available for selection: further options can be seen by scrolling
down the menus using the trackpad or soft keys.
RayChart 620
D3811-1