Packing List; Planning The Installation - Raytheon RayChart 620 Operation Manual

78
This chapter covers the following topics:

• Packing list

• Planning the installation

• Mounting the RayChart
• RayChart connections
• System check and initial setup
If you are connecting your RayChart to a larger system, you should
refer to the installation instructions for the other units and for connection
to the SeaTalk bus.
7.2 Packing List
Your RayChart display (part number M93536) should be supplied with
the following:
• Trunnion (yoke) bracket, fitted to the display with two knobs
• Self-tapping screws (4) for fixing trunnion bracket
• Power cable
• SeaTalk cable
• Sun cover
• Panel mounting kit, consisting of a gasket, thumb studs (4), thumb
nuts (4), and fixing template
• This handbook
• Quick reference card
If you have purchased the ChartPlotter GPS System (part number
M93550), the package will also include the Raytheon Raystar 112
GPS.
You may also need a Raytheon Electronics NMEA/RS-232 Interface
Box (part number Z290), if you wish to connect both SeaTalk and
NMEA compatible equipment.
7.3 Planning the Installation
Before starting the installation, you need to select a suitable location
and mounting method for the RayChart 620, and consider the
connection options and cabling requirements.
RayChart 620