Sip Configuration - Sip.cfg; Protocol <Volpprot - Polycom SoundPoint IP 301 Administrator's Manual

Administrator Guide - SoundPoint

4.6.1 SIP Configuration - sip.cfg

The configuration file sip.cfg contains SIP protocol and core configuration settings
that would typically apply to an entire installation and must be set before the phones
will be operational, unless changed via the local web server interface or local menu
settings on the phone. Settings include the local port used for SIP signaling, the
address and ports of a cluster of SIP servers, and other parameters. The following sec-
tions describe each of these parameters.
4.6.1.1 Protocol <volpProt/>
4.6.1.1.1 Local <local/>
Attribute
volpProt.local.port
® ®
IP / SoundStation IP
Permitted
Values Default
0 to 65535 5060
Copyright © 2005 Polycom, Inc.
Interpretation
Local port for sending and receiving SIP signaling
packets.
If set to 0 or Null, 5060 is used for the local port but
it is not advertised in the SIP signaling.
If set to some other value, that value is used for the
local port and it is advertised in the SIP signaling.
Optimization
73