How To Use - GE Profile PSCF5RGXBB Owners And Installation Manual

About CustomCool
ExpressThaw
™
ExpressChill
™
.
™
(on some models)
How it Works
The CustomCool feature is used to quickly
™
chill items, thaw items or hold the pan at a
specific temperature. This feature is a system
of dampers, a fan, a temperature thermistor
and a heater.

How to Use

Empty the pan. Place the Chill/Thaw tray
in the pan. Place the items on the tray
and close the pan completely.
Touch LED Dispenser Control:
Select the ExpressThaw
or SelectTemp pad. The display and SET
™
light will come on. Tap the pad until the
light appears next to the desired setting.
Use the following chart to determine the
best setting to use.
ExpressChill can be set to 15, 30 or 45
minutes. The default is 15 minutes.
To stop a feature before it is finished:
Touch LED Dispenser Control
The pan is tightly sealed to prevent
temperature fluctuations in the rest of
the refrigerator. The controls for this pan
are located on the dispenser with the
temperature controls.
Touch LED Dispenser Control::
Tap that feature's pad until no options are
selected and the display is off.
During ExpressThaw and ExpressChill,
the display on the controls will count
, ExpressChill
down the time
™ ™
in the cycle (on some models).
After the ExpressThaw cycle is complete,
the pan will reset to the MEAT setting
(32°F [0°C]) to help preserve thawed items
until they
are used.
The displayed actual temperature of the
CustomCool pan may vary slightly from
the SET temperature based on usage and
operating environment.
NOTE: For food safety reasons, it is
recommended that foods be wrapped in
plastic wrap when using ExpressThaw.
This will help contain meat juices and improve
thawing performance.
GEAppliances.com
7