Installation Instructions - GE Profile PSCF5RGXBB Owners And Installation Manual

DISCONNECT THE POWER COUPLING
4
(on some models)
If the refrigerator has a water dispenser,
there is a power line (harness) from the cabinet
into the bottom hinge on the freezer door that
must be disconnected.
To disconnect, pull apart at the coupling.
Bottom
freezer
hinge
DISCONNECT THE ELECTRICAL
5
CONNECTORS (on some models)
If the refrigerator has a refreshment center,
there are electrical connectors (harnesses)
from the cabinet into the bottom hinge
on the refrigerator door that must be
disconnected.
To disconnect, pull apart each connector.

Installation Instructions

Bottom
refrigerator
hinge
27
CLOSE THE FREEZER AND
6
REFRIGERATOR DOORS
REMOVE THE FREEZER DOOR
7
Remove the freezer door top hinge cover
A
(if equipped) by either squeezing it and pulling it
up or by prying it off with a plastic putty knife.
Remove the two 5/16" or 1/8" hex head screws,
B
then lift the hinge straight up to free the hinge
pin.
5/16" or 1/8" hex head
Open the freezer door to 90. °
C
90°