Charging The Battery Pack - JVC GZ-VX700BUS Detailed User Manual

User manual - english
Hide thumbs Also See for GZ-VX700BUS:
Table of Contents

Advertisement

Charging the Battery Pack

Charge the battery pack immediately after purchase and when the remaining
battery power is low.
The battery pack is not charged at the time of purchase.
1
Open the battery cover.
.
Slide open the battery cover in the direction of the arrow while
0
pressing it with your fingers.
2
Attach the battery pack.
.
Align the terminal of the battery pack with this unit.
0
3
Close the battery cover.
.
4
Connect the AC adapter to the DC connector and plug in the power.
AC Adapter To AC
Outlet (110 V to 240 V)
.
The charging lamp blinks when charging is in progress.
0
It goes out when charging is finished.
Memo :
To attach any other battery packs besides the supplied one, open the SD
0
card cover before attaching.
Make sure not to insert the battery pack in the wrong direction.
0
It may cause damage to the unit and battery pack.
Caution :
Be sure to use JVC battery packs.
Warning
If you use any other battery packs besides JVC battery packs, safety and
0
performance cannot be guaranteed.
Charging time: Approx. 3 h 30 m (using supplied battery pack)
0
The charging time is when the unit is used at 25°C. If the battery pack is
charged outside the room temperature range of 10°C to 35°C, charging
may take a longer time or it may not start. The recordable and playable
time may also be shortened under some usage conditions such as at low
temperature.
Be sure to use the supplied AC adapter.
If you use any other AC adapters besides the supplied AC adapter,
0
malfunctions may occur.
Getting Started
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

Everio gz-vx700Everio gz-vx705

Table of Contents