Table of Contents
Advertisement
Recording
Registering Human Face Personal
Authentication Information
By registering the face of a person beforehand, focus and brightness can be
adjusted automatically by the face tracking function. Up to 3 faces, together
with names and priority levels, can be registered.
It is recommended to register the faces that are often being recorded by this
camera beforehand.
1
Open the LCD monitor.
A
.
Set the recording mode to either A video or B still image.
0
To switch the mode between video and still image, tap A or B on the
0
recording screen to display the mode switching screen.
Tap A or B to switch the mode to video or still image respectively.
2
Tap "MENU".
PLAY
.
The shortcut menu appears.
0
3
Tap "MENU" in the shortcut menu.
.
4
Tap "FACE REGISTRATION".
VIDEO
FACE REGISTRATION
.
Tap 3 or 2 to move upward or downward for more selection.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
0
5
Tap "REGISTER NEW FACE".
FACE REGISTRATION
REGISTER NEW FACE
EDIT
CANCEL
.
100
REC
MENU
MENU
6
Point the camera toward the human subject.
NEED TO FIT FACE IN FRAME
.
Information is collected before face registration recording. The frame
0
appears blinking while information is being collected.
Adjust to fit the face within the frame while it is blinking. The frame
0
stops blinking and lights up after information collection is complete.
To cancel the registration, tap "STOP".
0
When "CANCEL FACE RECOGNITION?" appears, tap "YES" to
return to the normal recording mode.
7
Tap "RECORD" and record the face from the front.
RECORD THE FRONT VIEW
RECORD
.
A face is captured to be used on the face registration index screen.
0
Other than tapping "RECORD", you can also record by pressing the
0
SNAPSHOT button fully.
A sound can be heard when recording is complete.
0
To cancel the registration, tap "STOP".
0
When "CANCEL FACE RECOGNITION?" appears, tap "YES" to
return to the normal recording mode.
8
Tap "YES" to continue recording.
CURRENT RECORDING IS OK,
MORE FACE DATA WILL IMPROVE
FACE RECOGNITION ACCURACY,
CONTINUE RECORDING?
YES
.
To proceed to collect face information in the four directions of up,
0
down, left, and right, tap "YES". It is recommended to continue
recording to increase the accuracy of face recognition.
To end face registration recording, tap "NO". Go to step 11.
0
9
Rotate the face slowly in four directions to register the face information.
ROTATE THE FACE SLOWLY
.
Rotate the face slowly while looking at the camera. A sound can be
0
heard when recording is complete for each direction. (4 times in total)
Repeat the step until recording (registration) is complete for all
directions.
Registration of the four directions may fail depending on the shooting
0
environment. In this case, tap "STOP" to cancel recording, then tap
"NO" and go to step 11.
If the face cannot be properly recognized during recording, register
0
the face again.
10
Face the camera with a smiling face.
STOP
STOP
NO
STOP
Advertisement
Table of Contents
