Changing Channel Settings; Automatically Searching For Channels - Insignia NS-59P680A12 User Manual

• Equalizer—Sets the equalizer mode. You can
select:
• Mode—Selects the sound mode among
the predefined settings. You can select
Standard, Music, Movie, Clear Voice, or
Custom.
• Balance L/R—Adjusts the balance
between the right and left speaker.
• 100 Hz, 300 Hz, 1 kHz, 3 kHz, and
10 kHz—Adjusts the level of different
bandwidth frequencies.
• Reset—Resets the equalizer settings to
the default values.
• SRS TruSurround HD—If the sound is in 5.1
Surround Sound format, downmixes the
sound to produce Surround Sound quality
audio through your TV's speakers.
• Preferred Language—Selects the language
for a digital TV program, if multiple tracks are
available.
Note
You can also press MTS one or more times to
select the language for a digital program.
• Multi-Track Sound—Selects the audio mode
for an analog TV program. You can select
Mono, Stereo, or SAP (separate audio
program), depending on available audio
formats for the program. If you are having
difficulty receiving stereo audio, select Mono.
Note
You can also press MTS one or more times to
select the analog audio mode.
• Auto Volume—Automatically adjusts the
volume when changing channels. You can
select On or Off.
• Speaker Select—Selects the speakers the TV
sound is played through. You can select:
• External Speaker—Turns the TV speakers
off and plays the sound through the
speakers of a connected amplifier. When
you select this option, the volume and
MUTE buttons on the TV and the TV
remote do not work. You need to adjust
the volume using the amplifier controls.
• TV Speaker—Plays the sound through the
TV speakers.
• Sound Reset—Resets some or all of the
sound settings to the default settings. You can
select:
• Reset All—Resets all the sound settings to
default settings. Press ENTER to reset
sound settings.
• Reset Sound Mode—Resets the current
sound Mode settings to default settings.
For more information, see the Equalizer
option in this step.
• Cancel—Cancels any changes you have
made.
4 Press or ,
press ENTER to confirm.
5 Press RETURN to return to the previous menu or
EXIT to close the menu.
24
or to adjust the option, then
www.insigniaproducts.com

Changing channel settings

Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.

Automatically searching for channels

To automatically search for channels:
1 Press MENU. The on-screen menu opens.
Picture
Mode
Contrast
Sound
Brightness
Channel
Sharpness
Color
Setup
Tint (G/R)
Input
2 Press or to highlight Channel, then press
ENTER to access the Channel menu. Antenna is
highlighted.
Sound
Channel
Antenna
Auto Program
Setup
Clear Scrambled Channel
Input
Channel List
Fine Tune
Signal Strength
3 Press ENTER to access the Antenna option,
press or to highlight Air (antenna signal) or
Cable (cable TV signal), then press ENTER to
confirm. For more information, see "Resetting
the Plug & Play option" on page 39.
4 Press or to highlight Auto Program, then
press ENTER to access the option.
NS-51P680A12/NS-59P680A12
: Standard
: 95
: 45
: 50
: 50
: G50/R50
: Air