Front; Back - Insignia NS-59P680A12 User Manual

Front

SOURCE
# Item Description
Press to turn your TV on or off (standby mode). When
you turn off your TV, power still flows into it. To
1
(power)
disconnect power, turn off the surge protector (if you
are using one) or unplug the power cord.
Press to select the video input source. For more
information, see "Selecting the video input source" on
2
page 17.
SOURCE button
In on-screen menus, this button functions like the
ENTER button on the remote control.
3
MENU button Press to open the on-screen menu.
4
VOL+/VOL– buttons Press to increase or decrease the volume.
Press to tune to the next or previous channel in the
5
CH /CH buttons channel list. For more information, see "Selecting a
channel" on page 19.
Blinks, then turns off when you turn on your TV. Lights
6
Power indicator
red when your TV is on.
7
Remote control sensor Receives signals from the remote control. Do not block.
8
Speakers Outputs the sound from your TV.
6
SOURCE
www.insigniaproducts.com

Back

# Jack Description
1
Power in Connect the power cord to this jack.
Connect the cable for an outdoor antenna or cable
TV to this jack. For more information, see
2
ANT IN
"Connecting an outdoor antenna" on page 10 or
"Connecting cable TV" on page 10.
Connect a digital audio amplifier to this jack. For
DIGITAL AUDIO OUT
3
more information, see "Connecting a digital audio
(OPTICAL)
amplifier" on page 15.
4
SERVICE1 Used for service only.
5
SERVICE2 Used for service only.
Connect the audio for a DVI device to this jack. For
6
DVI AUDIO IN more information, see "Connecting a DVI device"
on page 13.
Connect an HDMI device to either HDMI jack. For
more information, see "Connecting an HDMI
device" on page 13.
HDMI IN 1 (DVI)/
7
HDMI IN 2
Connect a DVI device to the HDMI IN 1 jack. For
more information, see "Connecting a DVI device"
on page 13.
Connect a component video device to these jacks,
COMPONENT IN 1 PR, PB, Y
or connect an analog video device to the Y/VIDEO
and R-AUDIO-L
8
jack and the audio jacks. For more information, see
AV1 IN VIDEO and
"Connecting a component video device" on
R-AUDIO-L
page 14 or "Connecting a VCR" on page 12.
Connect a component video device to these jacks.
COMPONENT IN 2 PR, PB, Y
9
For more information, see "Connecting a
and AUDIO L/R
component video device" on page 14.
NS-51P680A12/NS-59P680A12