Insignia NS-59P680A12 User Manual page 25

3 Press or to highlight an option, then press
ENTER to access the option.
Note
You may have to scroll down to see all the
options.
You can select:
• Color Tone—Selects the color tone. You can
select Cool, Normal, Warm1, or Warm2.
Warm1 and Warm2 are only available if the
Mode option is set to Movie.
• Size—Sets the picture aspect ratio. The
availability of these options depends on the
video input source. For more information, see
"Picture sizes available for input sources" on
page 22.
16:9
Zoom2
4:3
You can select:
• 16:9—Sets the picture to the 16:9 aspect
ratio.
• Zoom1—Stretches the 16:9 aspect ratio
picture vertically.
• Zoom2—Stretches the Zoom1 picture
vertically.
• Wide Fit—Stretches the picture both
horizontally and vertically to display the
optimal picture.
• 4:3—Sets the picture to the 4:3 aspect
ratio.
• Screen Fit—Displays the full native HD
signal that cannot be viewed using a
normal TV.
For more information adjusting the picture, see
"Adjusting the picture size" on page 21.
Note
You can also press ZOOM one or more times
to select the picture size.
• Digital NR—(Digital Noise Reduction)
Reduces noise (static and ghosting) that may
appear on the screen. You can select Off, Low,
Medium, High, or Auto.
Zoom1
Wide Fit
Screen Fit
Adjusting the picture size
www.insigniaproducts.com
• HDMI Black Level—Adjusts the black level of
the picture when the video input source is a
device connected to the HDMI1 (DVI) or
HDMI2 jack on the back of your TV. You can
select:
• Normal—The screen gets brighter.
• Low—The screen gets darker.
Note
HDMI Black Level may not be compatible
with all external devices.
• Film Mode—Automatically senses and
processes film signals from all sources and
adjusts the picture for optimum quality. You
can select Off or Auto.
Note
Film mode is supported in TV, Video,
component video (480i/1080i), and HDMI
(1080i) modes.
• Screen Burn Protection—Helps protects the
screen from "burn-in. " When a screen image
remains in one position for too long, the
image may be permanently burned into the
screen. You can select:
• Pixel Shift—Shifts the picture position
every two minutes.
• Scrolling—Displays a moving pattern.
• Side Grey—When the video source is
displayed in a 4:3 picture size, sets the
sides of the image to gray. You can select
Dark (darkens the sides) or Light
(brightens the sides).
• Picture Reset—Resets the advanced picture
settings to the default settings. Press ENTER to
reset picture settings.
4 Press or , or to adjust the setting, then
press ENTER to confirm.
5 Press RETURN to return to the previous menu or
EXIT to close the menu.
To adjust the picture size:
• If you select Zoom1, Zoom2, or Wide Fit, you can
adjust the position. Press
Position, then press ENTER. Press
move the picture up or down. To reset the picture
to the default setting, press
Reset, then press ENTER.
• If you select Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you made need
to center the picture. Press
Position, then press ENTER. Press
to move the picture. To reset the picture to the
default setting, press or
then press ENTER.
or to highlight
or to
or to highlight
or to highlight
or , or
to highlight Reset,
21