Insignia NS-59P680A12 User Manual page 20

5 Press or to highlight Home Use, then press
ENTER. The Select the Antenna source to
memorize screen appears.
Select the Antenna source to memorize.
Air
Cable
Auto
6 Press or to highlight your TV signal source,
then press ENTER. You can select Air (antenna),
Cable (cable TV), or Auto (both antenna and
cable TV). If you have digital cable, select Auto.
7 If you select Cable, press
highlight the cable TV signal type, then press
ENTER. You can select STD, HRC, or IRC for
analog (antenna-based or without a cable box)
or digital signals. STD is the most common
setting. If you do not know which type of cable
TV signal you have, contact your cable TV
provider.
Note
• Standard Cable TV (STD) - The most widely used
method of spacing and transmitting television
channels on a cable television system to prevent
interference between the different channels. If
your first broadcast channel is channel 2, then
your cable company uses Standard. If your first
broadcast channel is channel 1, then your cable
company uses the HRC (Harmonic Relate
Carrier) method.
• Harmonic Related Carrier (HRC) - Harmonic
Related Carrier is a method of spacing and
transmitting television channels on a cable
television system to prevent interference. The
channels are spaced at 6-MHz intervals, with all
carrier frequencies harmonically related to a
common reference.
• Incremental Related Carriers (IRC) - A method of
spacing and transmitting television channels on
a cable television system that prevents
interference between the channels and reduces
a form of distortion.
Your TV starts searching for channels available in
your viewing area. The channel information is
stored in the channel list. Scrambled channels are
not stored in the list.
Auto Program in Progress.
DTV Air : --
DTV Cable : --
Note
To stop the search, press ENTER.
16
Plug & Play
Start
Start
Start
or , or to
Plug & Play
Air : 8
Air 11
Cable : --
3%
Stop
www.insigniaproducts.com
NS-51P680A12/NS-59P680A12
When the search is complete, the Sets the Clock
Mode screen appears.
Plug & Play
Sets the Clock Mode.
Clock Mode
8 Press ENTER, then press
Auto (to automatically set the time using time
information from a digital channel) or Manual
(to manually set the time), then press ENTER.
Plug & Play
Sets the Clock Mode.
Clock Mode
• If you select Auto, the Set to daylight saving
time screen appears.
• If you select Manual, the Set current date and
time screen appears. For instructions on how
to manually set the time, see "Setting the
clock" on page 35.
9 If you selected Auto, press
• Off—Turns off the daylight saving time
feature.
• On—Turns on the daylight saving time
feature.
• Auto—Sets the daylight saving time feature
based on the time information from a digital
channel.
10 Press ENTER. The time zone screen appears.
Plug & Play
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific
▼
11 Press or to highlight a time zone, then
press ENTER. If you receive a digital channel
signal, the time zone is selected automatically.
: Auto
or to highlight
: Auto
Auto
Manual
or to highlight: