Insignia NS-42P650A11 Quick Setup Manual

42"/50" Plasma HDTV
QUICK SETUP
GUIDE
NS-42P650A11/NS-50P650A11
Thank You
for purchasing this ne Insignia television.
We hope you enjoy the quality and reliability
of this product for years to come.
_______________________________
Remote control
and 2 AAA
batteries
Cleaning
cloth
AC
power
Ferrite core (2)
cord
Stand and 10
M4 screws
Anti-fall device
Base cover and screws
and screw
Quick Setup Guide
Front features
Remote
control sensor
Installing the stand
1 Secure the base to the stand with
the four screws provided.
Warning- Always store the
TV upright because of the
possibility of damage to
the screen. Use 2 or more
people to help secure the
stand.
Installing a wall-mount bracket
1 If the stand is installed, remove the four screws securing it to the TV and
remove the stand.
2 For an Insignia wall mount, attach the wall-mount bracket to the back of
your TV using four M8 screws.
OR
For a non-Insignia wall
mount, attach the
wall-mount bracket to the
back of your TV using four
M8 screws. Install the base
cover using the two screws
non-Insignia wall mount
provided.
Setting up your
remote control
1 Remove the battery cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries align with the + and –
symbols in the battery compartment.
3 Replace the cover.
Programming your remote
control
To program an existing universal remote control to work with your new
Insignia TV, see the table below for common codes. If you have problems
programming your remote or need a di erent remote control code, visit
www.insigniaproducts.com for the latest remote control code information.
Universal remote control TV codes
(for all Insignia TVs manufactured after Jan. 1, 2007)
Universal remote control makers and models Set-top box makers and models
Philips
RCA One for All Sony Comcast Dish Network Motorola TIVO
PHDVD5, PH5DSS,
RCU807 URC-6690 RM-VL600 M1057 VIP508, VIP622 DRC800 Series 3, HD
PMDVR8, PDVR8
135 0464 8043 0463 720 0463 0091
115
To program your universal Insignia remote control to work with other devices
in the home, see your user guide or visit www.insigniaproducts.com.
Connecting a DVD or Blu-ray DVD player, cable
box, satellite receiver, or game console
Using HDMI (best)
Using component (good)
Connecting an antenna
Connect a 75 ohm cable (not included) to the ANT IN jack on the back of your
TV and the RF OUT jack on the antenna.
DirectTV
RC23
10463
Connecting a Home Theater System
Using analog audio
Using digital audio
Connecting power
Plug the AC power cord into the AC IN jack on the back of your TV, then plug the
other end of the cord into a power outlet.