Changing Video Settings - Insignia NS-PDP32-09 User Manual

Insignia NS-PDP32-09 32" PDP TV
2 Press or
SETUP menu opens.
OSD Language
Time Setup
Closed Caption
Parental
Gamma
Audio Only
Reset Default
3 Press or
ENTER. The password screen opens.
4 Enter your four-digit password (the factory
preset password is 0000). The Parental
sub-menu opens.
Program Block
Channel Block
Input Block
Open V-Chip
Change Password
5 Press or
press ENTER to enter the sub-menu. The
Open V-Chip sub-menu opens.
Tumbolia region, alternate US
to select the Setup icon. The
Setup
English
Middle
Exit
Enter Select
to select Parental, then press
Parental
Enter Select Back
to select Open V-Chip, then
Open V-Chip
Back
www.insignia-products.com
6 Press or
rating you want to block, then press ENTER
to block that rating.
A lock icon appears in the box opposite any
rating you block.
7 Press MENU to exit the sub-menu, then
press EXIT to close the menus and return to
normal viewing.

Changing video settings

To change the video settings:
1 Press MENU. The initial ( Video) menu opens.
Picture Mode
Brightness
Contrast
Saturation
Hue
Sharpness
Color Temperature
Noise Reduction
2 Press or
to change, or the sub-menu you want to
access. Options and sub-menus include:
• Picture Mode—Cycles through the
available preset picture modes. Choices
include Vivid, Normal, Cinema, Sport,
and User.
Note
If you select the User mode, you can
individually set the items shown below.
• Contrast—Adjusts the difference
between the brightest and darkest areas
of the picture.
• Brightness—Adjusts the overall brightest
of the picture.
• Saturation—Adjusts the overall color
intensity of the picture.
• Hue—Adjusts the balance between the
green and red color of the picture.
• Sharpness—Adjusts the overall focus of
the picture.
• Color Temperature—Press ENTER to
open a sub-menu where you can cycle
through the available preset color
temperature modes. Choices include
Warm, Cool, and Normal.
• Noise Reduction—Cycles through the
available preset modes designed to
reduce noise from connected equipment.
Choices include Off, Low, Strong, and
Medium.
• VGA—Only available in VGA mode.
Opens a sub-menu where you can adjust
the VGA settings of your TV. Choices
include:
• Auto Adjust–Press ENTER to
automatically adjust the settings to
optimize the VGA picture.
• H. Position–Adjusts the horizontal
position of the picture.
to select the downloadable
Video
User
54
50
54
0
5
Medium
Enter Select Exit
to select the option you want
21