Front And Right Side; Back - Insignia NS-PDP32-09 User Manual

Insignia NS-PDP32-09 32" PDP TV

Front and right side

# Item Description
1 VOL +/VOL - Press to increase or decrease the volume.
button
2 Press to change to a higher or lower
/
CH CH
channel.
button
3 MENU button Press to open the on-screen menu.
4 INPUT button Press to select the AV signal input. You can
select:
• TV (CABLE/AIR)
• VIDEO1 (REAR)
• S-VIDEO1 (REAR)
• VIDEO2 (SIDE))
• S-VIDEO2 (SIDE)
• YPbPr1
• YPbPr2
• HDMI1 (REAR)
• HDMI2 (REAR)
• HDMI3 (SIDE)
• PC (VGA).
5 Press to turn your TV on or off.
(power)
button
6 Power/Standby Lights when your TV is plugged into a
indicator power outlet. When your TV is on, the
indicator is blue. When your TV is in
standby mode, the indicator is red.
7 IR sensor Receives signals from the remote control.
Do not block.

Back

# Description
1 HDMI 1 IN
2 HDMI 2 IN
3 PC IN VGA
4 PC IN AUDIO L/R
5 S-VIDEO1 IN (S-Video
and L/R audio)
6 VIDEO1 IN (composite
video and L/R audio)
7 YPbPr1 IN, AUDIO L,
and AUDIO R
www.insignia-products.com
Function
Connect an HDMI cable to this
connector. Supports HD video
and digital audio. Does not
support 480i. Accepts DVI video
using an adapter or HDMI-to-DVI
cable (not included). See
"Connecting AV equipment with
an HDMI cable" on page 11.
Connect an HDMI cable to this
connector. Supports HD video
and digital audio. Does not
support 480i. Accepts DVI video
using an adapter or HDMI-to-DVI
cable (not included). See
"Connecting AV equipment with
an HDMI cable" on page 11.
Connect a VGA (D-sub) cable
from your PC to this connector
(analog PC). See "Connecting a
PC" on page 12.
Connect left (white) and right
(red) audio cables to the L and R
jacks. See "Connecting a PC" on
page 12.
Connect an S-Video cable and
connect left (white) and right
(red) audio cables to the L and R
jacks. See "Connecting a VCR" on
page 9.
Connect a video cable (analog
composite video - 480i) to this
jack (yellow). See "Connecting a
VCR" on page 9.
Connect left (white) and right
(red) audio cables to the L and R
jacks.
Connect component video cables
to the Y, Pb, and Pr jacks and
audio left (white) and right (red)
cables to the L and R jacks. See
"Connecting a DVD player" on
page 10.
5